wiki:tutorial
This is an old revision of the document!
VPCS is not Swissknife, it only has a few commands to help us to study Cisco switch/router, that's all.
I use the next case to test the functions of VPCS.
The topology:
20000 30000 T2000 30002 20002
PC1 ---- f0/0 -* ^ *- f0/0 - PC3
| | |
| ^ |
T2001<-< R1 --- f1/0:f0/0 -- R0 --- f0/1:f1/0 --- R2 >-> T2002
| 21000 21001 | 21002 21003 |
PC2 ---- f0/1 -* | *- f0/1 - PC4
20001 30001 *----*-----*------*-------* PC9 30003 20003
30004 30005 30006 30007 21004 20008
| | | | | |
20004 20005 20006 20007 41000 41008
PC5 PC6 PC7 PC8 | |
*-----*
|
R3 >-> T2003
Routers
R1: console 2001
f0/0 connect PC1
f0/1 connect PC2
f1/0 connect R0
R2: console 2002
f0/0 connect PC3
f0/1 connect PC4
f1/0 connect R0
R0: console 2000
f0/0 connect R1
f0/1 connect R2
f2/0 connect PC5
f2/1 connect PC6
f2/2 connect PC7
f2/3 connect PC8
f2/4 connect R3
R3: console 2003
f0/0 connect R0
f0/1 connect PC9
with NM-16ESW, connects R1 and R2, R3 with NM-16ESW connects R0
wiki/tutorial.1289737952.txt.gz · Last modified: 2010/11/14 12:32 by mirnshi